| |
| Jaw
Crusher |
| Double
toggle (Oil lubrication). |
|
|
Single
toggle |
|
Double
toggle |
|
| |
|
|
|
Jaw
Crusher Range and Specification |
Single
toggle (Grease lubrication). |
Model |
Output
(Ton/Hr) |
RPM |
Motor |
Feed
size |
Inlet
Size
|
|
Out
let gap (MM) |
|
(HP) |
max
(MM) |
(MM) |
|
60 |
50 |
40 |
25 |
20 |
15 |
|
|
|
|
VJC16x9 |
18 |
16 |
14 |
12 |
10 |
-- |
300 |
25 |
180 |
400 x 225 |
VJC12x7 |
-- |
-- |
10 |
8 |
6 |
-- |
300 |
15 |
140 |
300 x 175 |
VJC10x6 |
-- |
-- |
4 |
3 |
2 |
1.5 |
300 |
10 |
125 |
250
x 150 |
VJC8x4 |
-- |
-- |
-- |
1.2 |
0.8 |
0.5 |
300 |
5 |
75 |
200 x 100 |
|
| |
Double
toggle (Oil lubrication). |
Model |
Output
(Ton/Hr) |
RPM |
Motor |
Feed
size |
Inlet
Size
|
|
Out
let gap (MM) |
(HP) |
(MM) |
max
(MM) |
(MM) |
|
20 |
25 |
31 |
37 |
50 |
62 |
|
|
|
|
VJC20x12 |
|
16 |
19 |
22 |
30 |
38 |
350/380 |
25 |
250 |
500x300 |
|
| |
| All
the data given are nominal only and based on stone of
1600 kg/m2 density . It may vary
widely
from case to case depending upon many factors. |
| |
Use
of Jaw Crusher: |
| |
Varahi
Jaw Crusher is to crush for Crushing wide variety
of hard material. Lime Stone, Marble, Granite, Rock,
Dolomite, Bentonite, Coal, Ferro-Alloys etc. |
ABOUT
Single Toggle JAW CRUSHER |
Heavy
duty with robust design single toggle Jaw Crusher
is having Mild steel fabricated body. Body is strengthened
to withstand heavy load. Main (Eccentric) shaft is
running on antifriction bearings. Jaw plates and chick
plates are made from highly wear resistance manganese
steel. Oscillating Jaw is fabricated from mild steel,
which is fitted on main shaft. Both flywheels are
work as pulleys. Flat OD wheels are for flat belt
drive and V-grooved wheels is for V-belt drive. Out
let gap can be varied easily by add OR remove mild
steel plates between toggle plate and main body. |
ABOUT
Double Toggle JAW CRUSHER |
Heavy
duty with robust design double toggle Jaw Crusher
is having Mild steel fabricated strong box beam designed
body to withstand heavy load. Eccentric shaft made
from alloy steel is running on antifriction bearings.
Jaw plates and chick plates are made from highly wear
resistance manganese steel. Fix jaw is fabricated
from mild steel and fitted on machined surface of
body. Oscillating jaw is fabricated from mild steel
and fitted on hinge pin with low-pressure bearing.
Hinge pin on center of crusher to help direct crushing
without rubbing. Double toggle provide balance distribution
of maximum load on eccentric shaft. Liter spring provide
cushioning to the toggle, which is compensator for
wear ant tear. Both flywheels are work as pulleys
and reduce power requirement. Flat OD wheels are for
flat belt drive and V-grooved wheels is for V-belt
drive. Out let gap can be varied easily by add OR
remove mild steel plates between toggle plate and
main body. |
| |
