JetMil
Range and Specification |
| |
Model |
Output
(Kg/Hr) |
Air
Req. (CFM) |
Air
Comp. (HP)
|
VMF-2 |
1 |
25 |
10 |
VMF-4 |
3 |
45 |
20 |
VMF-6 |
10 |
75 |
30 |
VMF-8 |
22 |
125 |
40 |
VMF-10 |
40 |
200 |
50 |
VMF-12 |
65 |
265 |
60 |
VMF-15 |
100 |
380 |
75 |
VMF-18 |
160 |
530 |
120 |
VMF-20 |
210 |
650 |
150 |
VMF-24 |
400 |
1050 |
250 |
VMF-30 |
720 |
1725 |
450 |
|
| |
Operating
pressure in between 7-8kg/cm2
Average feed size of materials is 200 mesh
Adequate quantity of air, Controlled feed and
microfine setting play an important roll.
All the data given are nominal only. It may
vary widely from case to case depending upon
many factors.
|
|
| |
Use
of Jet Mill: |
Varahi
Jet mill is to micronise Pharmaceuticals, Chemicals,
Pigments, Minerals, Agrochemicals, Minerals and termoplastics.
It is also for heat sensitive, corrosive and abrasive
materials. |
About
Jet Mill: |
Micronizing as well as classification
is to be done in Varahi JetMill by taking advantage
of fluid energy. Mill is designed to inject high
pressure Air or Steam in to cylindrical chamber
through Specialy designed Nozzle. Nozzles are placed
at equally spaced on peripheral wall to have each
Jet is tangential at imaginary smaller circumference.
Venturi system is control fed rate of material very
precisely to get productivity. Jets are generate
high velocity vortex during material feeding which
create vacuum to suck product into high speed vortex.
Suspended partical of the material are collide with
each other and reduce themselves by attrition as
well as collision whenever it comes in strong velocity
gradients near the jet. Micronised particals are
getout with jet fluid through center of chamber
and get collected into the cyclone collector system.
Heavier or oversize particals are stay in to chember
until micrinized due to Centrigugal force.
|
|
Benefits of our Design:
|
Unique design to micronise wide range of dry solids
material very economically and efficiently. Partical
collide each other without any moving part, which
results absolute productivity and negligible maintenance.
Provided inter-changeable liners. Easy dismantle for
cleaning and quick reassemble is possible for cleaning
and material change. Compact design require lees floor
space.
|
|
Benefits of our Jet mill:
|
For
example, 2 micron size particle improve product quality
to great extent as compared to 325-mesh particle in
terms of efficiency, dispersions, behavior and intimate
blends of different material. It is due to increase
in number of particles and surface area. It also increase
suspensibility, dispersion rate, surface area of particle
and bulk density. |
Models selection different project and order:
|
Design:
General OR Pharma.
Construction: MS, SS, OR Polymer.
Wear reduction: Liners OR lined chamber with different
material.
Different design: Grinding chamber and venturi feeding
system.
Discharge: Top Or Bottom.
Material collection: Cyclone, dust collector, pulse
jet dust collector or their combination.
|
After sales service support
|
VARAHI
ENGINEERING AND FABRICATORS can provide full range
of field service and engineering support. Staff of
company is available to assist customer with instructions,
installation, start-up, and maintenance. |
